User Tools

Site Tools


m0dul-flame_rgb-mod

This is an old revision of the document!


Table of Contents

material

  • original flame m0dul
  • 1x RGB LED
  • 2x 100K SMD Resistors
  • a few centimeters hookup wire (german: Fädeldraht)
  • soldering equipment

Source LRTB G6TG RGB MultiLED LED Datasheet

building

Step 1

  • unscrew the acrylic flame
  • unsolder the original one-color LED

Step 2

  • solder the RGB LED to contact A1 and C1 those pads were used by the original one-color LED
  • solder the hookup wire to contact C2 and C3
  • connect A2 and A3 together and solder one hookup wire to it

Step 3

  • solder two 100K Resistors to the board
  • connect the two wires from C2 and C3 to the board
  • connect the third wire to VCC

m0dul-flame_rgb-mod.1313615757.txt.gz · Last modified: 2011/08/17 23:15 by joe