r0ket

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Description ======

Torch is a simple parasitic m0dule for r0ket. It uses the regulated 3.3v power supply and r0kets plentiful battery to drive a couple of white leds triggerd by an attached pushbutton.  

====== Usage ======

Grip your r0cket so you can reach the pushbutton. Then press it. If your r0ket is turned on then it should light up. 

====== WTF is it? ======

Light or visible light is electromagnetic radiation that is visible to the human eye, and is responsible for the sense of sight.

====== Mounting ======

the module gets its power from the first 3 pins of the module b header. take a look at the m0dule header pinout if you are unsure. 

====== Used addresses ======

none

====== Assembly ======

not sure if this is really necessary for such a simple module.

===== Schematic =====

VCC -- Button -- LED -- GND


====== Software ======

No Software modification is needed for this m0dule.