User Tools

Site Tools


backup_firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
backup_firmware [2011/08/10 13:16]
ikarus
backup_firmware [2011/08/10 13:31] (current)
ikarus
Line 1: Line 1:
-====== ​Backup ​usb_storage ====== +{{Delete|Backup ​has nothing ​to do with firmware i think... just usb_storage}}
-This will help you to backup your own r0ket memory and restore it. For example if your r0kets data flash is corrupted. +
- +
-===== Backup old usb_storage ===== +
-  * Connect your r0ket via USB. +
-  * Select the usb_storage mode from the r0ket menu. +
-  * Unmount the r0ket storage (e.g. Ubuntu automounts storage devices) +
-  * Run: +
-    <​code>​sudo dd if=/dev/sdX of=r0ket_backup.dat</​code>​ (Replace X with the fitting device letter for your system) +
- +
-You now have a backup from your r0ket. +
- +
-===== Restore usb_storage ===== +
-  * Connect your r0ket via USB. +
-  * Select the usb_storage mode from the r0ket menu. +
-  * Unmount the r0ket storage (e.g. Ubuntu automounts storage devices) +
-  * Run: +
-    <​code>​sudo dd of=/dev/sdX if=r0ket_backup.dat</​code>​ (Replace X with the fitting device letter for your system) +
-  * Reboot your r0ket. +
- +
-===== Restore original ​usb_storage ​using a friends backup ===== +
-  * Backup (if possible) your priv.key, pubx.key and puby.key file. +
-  * Do the same as seen in the "​Restore original firmware"​ section. +
-  * Replace the priv.key, pubx.key and puby.key with your backuped files. +
- +
-I experienced a MAC problem with the SENDCARD l0dable. I fixed it by simply +
-downloading the SENDCARD l0dable from [[l0dable|here]] and replaceing it with that on the r0ket. +
backup_firmware.1312974994.txt.gz · Last modified: 2011/08/10 13:16 by ikarus